Dell PowerEdge 2400 랙 설치 지침 - 페이지 28
{카테고리_이름} Dell PowerEdge 2400에 대한 랙 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2400 32 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2400에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (8 페이지), 업데이트 (2 페이지), 활성화 매뉴얼 (8 페이지), 설치 매뉴얼 (8 페이지), 업데이트 매뉴얼 (2 페이지), 매뉴얼 (15 페이지)
페이지 인쇄
1-16
Dell PowerEdge 2400 Systems Rack Installation Guide
6.
Press up on the green latches and push the chassis into the rack.
7 .
Tighten the thumbscrews on each rack adapter bracket.
Installing the Cable-Management Arm
To install the cable-management arm on the computer, perform the following steps:
1.
Secure the loose end of the cable-management arm to the back vertical rail as
shown in Figure 1-14.
Use one 10-32 x 0.5-inch Phillips-head screw to secure the cable-management
and template arm to the back vertical rail as shown in Figure 1-14. (This is the rail
on the right as you face the back of the rack.) Ensure that the cable-management
arm is straight in relation to the computer—that is, parallel to the ground.
8-32 x 0.313-inch
screws (2)
bracket
Figure 1-14. Installing the Cable-Management Arm
vertical rail
10-32 x 0.5-inch
screw
cable-management
arm
Velcro strip
back of computer