Dell PowerEdge 2400 Instructions pour l'installation du rack - Page 28

Parcourez en ligne ou téléchargez le pdf Instructions pour l'installation du rack pour {nom_de_la_catégorie} Dell PowerEdge 2400. Dell PowerEdge 2400 32 pages. Wake-on-lan (wol) support on dell servers
Également pour Dell PowerEdge 2400 : Manuel d'installation (20 pages), Manuel d'installation (8 pages), Mise à jour (2 pages), Manuel d'activation (8 pages), Manuel d'installation (8 pages), Manuel de mise à jour (2 pages), Manuel (15 pages)

1-16

Dell PowerEdge 2400 Systems Rack Installation Guide

Press up on the green latches and push the chassis into the rack.

7 .

Tighten the thumbscrews on each rack adapter bracket.

Installing the Cable-Management Arm

To install the cable-management arm on the computer, perform the following steps:

Secure the loose end of the cable-management arm to the back vertical rail as

shown in Figure 1-14.

Use one 10-32 x 0.5-inch Phillips-head screw to secure the cable-management

and template arm to the back vertical rail as shown in Figure 1-14. (This is the rail

on the right as you face the back of the rack.) Ensure that the cable-management

arm is straight in relation to the computer—that is, parallel to the ground.

8-32 x 0.313-inch

screws (2)

bracket

vertical rail

10-32 x 0.5-inch

screw

cable-management

arm

Velcro strip

back of computer