Dell PowerEdge 860 Manual de servicio - Página 22
Navegue en línea o descargue pdf Manual de servicio para Servidor Dell PowerEdge 860. Dell PowerEdge 860 37 páginas. Sas/raid controller installation
También para Dell PowerEdge 860: Información actualizada (14 páginas), Manual de instalación (28 páginas), Manual de instrucciones de instalación (7 páginas)
Back to Contents Page
Center Control Cover
Dell™ Vostro™ A840/A860 Service Manual
Removing the Center Control Cover
Replacing the Center Control Cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
Removing the Center Control Cover
1. Follow the procedures in
Before You
2. Turn the computer over and remove the screws that secure the hinge cover to the battery bay. For the Vostro™ A840, there are four screws. For the
Vostro™ A860, there are eight screws.
3. Turn the computer over and open the display as far as possible.
NOTICE:
Be extremely careful when removing the center control cover. The cable connector is very fragile.
4. Pry out the center control cover from left to right.
.
1
center control cover
5. Remove the center control cover.
Begin.