- ページ 22

サーバー Dell PowerEdge 860のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerEdge 860 37 ページ。 Sas/raid controller installation
Dell PowerEdge 860 にも：情報更新 (14 ページ), インストールマニュアル (28 ページ), 取付説明書 (7 ページ)

ページを印刷する

Back to Contents Page

Center Control Cover

Dell™ Vostro™ A840/A860 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Removing the Center Control Cover

1. Follow the procedures in

Before You

2. Turn the computer over and remove the screws that secure the hinge cover to the battery bay. For the Vostro™ A840, there are four screws. For the

Vostro™ A860, there are eight screws.

3. Turn the computer over and open the display as far as possible.

NOTICE:

Be extremely careful when removing the center control cover. The cable connector is very fragile.

4. Pry out the center control cover from left to right.

center control cover

5. Remove the center control cover.

Begin.