Dell PowerEdge 860 Servicehandleiding - Pagina 22

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell PowerEdge 860. Dell PowerEdge 860 37 pagina's. Sas/raid controller installation
Ook voor Dell PowerEdge 860: Informatie-update (14 pagina's), Installatiehandleiding (28 pagina's), Handleiding voor installatie-instructies (7 pagina's)

Back to Contents Page

Center Control Cover

Dell™ Vostro™ A840/A860 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the

computer.

Removing the Center Control Cover

1. Follow the procedures in

Before You

2. Turn the computer over and remove the screws that secure the hinge cover to the battery bay. For the Vostro™ A840, there are four screws. For the

Vostro™ A860, there are eight screws.

3. Turn the computer over and open the display as far as possible.

NOTICE:

Be extremely careful when removing the center control cover. The cable connector is very fragile.

4. Pry out the center control cover from left to right.

center control cover

5. Remove the center control cover.

Begin.