Dell UltraSharp UP3218K Manual de servicio - Página 4

Navegue en línea o descargue pdf Manual de servicio para Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 páginas.
También para Dell UltraSharp UP3218K: Manual del usuario (50 páginas), Manual de inicio rápido (2 páginas), Manual de inicio rápido (2 páginas), Manual de desmontaje (6 páginas)

Necessary repair and test equipment:

1. Philips-head screwdriver

4.1 Disassembly Procedures:

Remove the monitor stand base:

1. Place the monitor on a soft cloth or cushion.

2. Press and hold the stand-release button.

3. Lift the stand up and away from the monitor.

Use a Philips-head screwdriver to remove 4pcs

screws for unlocking mechanisms.

(No.1~4 screw size=M4x10; Torque=12

Wedge your fingers between the rear cover and the

middle bezel on the corners of the top side of the

monitor to release the rear cover, then use one hand

to press the middle bezel, the other hand to pull up

carefully the rear cover in order of arrow preference

for unlocking mechanisms of rear cover.

4. Disassembly and Assembly Procedures

0.5kgfxcm)

Remove the rear cover and put it on a protective

cushion. Use a Philips-head screwdriver to remove

14 screws for unlocking the middle plastic bezel with

the whole unit, and then remove the middle plastic

bezel carefully.

(No.1~14 screw size=M3x5.5, Torque=4

Tear off 7 pieces of aluminum foil. Disconnect the

lamp cable from the connectors of the power board

and panel module. Use a Philips-head screwdriver to

remove 3 screws for unlocking the speakers'

protective cover with the middle iron bezel.

(No.1~3 Screw size=M3x4, Torque=3.5~4.5kgfxcm)

0.5kgfxcm)