Dell Networking Z9500 Manual de instalación - Página 31
Navegue en línea o descargue pdf Manual de instalación para Interruptor Dell Networking Z9500. Dell Networking Z9500 47 páginas. Z9500 switch
También para Dell Networking Z9500: Manual de introducción (34 páginas)
Imprimir página
3.
Plug in the AC3 prong cord from the switch PSU to the external power source (the AC wall outlet).
Figure 9. Connecting AC Power Supply Cords
1.
AC3 Prong
NOTE: The system is powered-up as soon as you connect the power cord between the system
and the power source.
CAUTION: Always disconnect the power cable before you service the power supply slots.
CAUTION: Use the power supply cord as the main disconnect device on the AC system.
Ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
4.
Repeat steps 1 through 3 above for all PSUs.
NOTE: Ensure that the PSU is correctly installed. When you correctly install the PSU, the power
connector is on the left side of the PSU.
Z9500 Installation
31