Dell Networking Z9500 Panduan Instalasi - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell Networking Z9500. Dell Networking Z9500 47 halaman. Z9500 switch
Juga untuk Dell Networking Z9500: Panduan Memulai (34 halaman)

Halaman Cetak

Plug in the AC3 prong cord from the switch PSU to the external power source (the AC wall outlet).

Figure 9. Connecting AC Power Supply Cords

AC3 Prong

NOTE: The system is powered-up as soon as you connect the power cord between the system

and the power source.

CAUTION: Always disconnect the power cable before you service the power supply slots.

CAUTION: Use the power supply cord as the main disconnect device on the AC system.

Ensure that the socket-outlet is located/installed near the equipment and is easily accessible.

Repeat steps 1 through 3 above for all PSUs.

NOTE: Ensure that the PSU is correctly installed. When you correctly install the PSU, the power

connector is on the left side of the PSU.

Z9500 Installation