Dell PowerConnect B-DCX-4S Backbone Procedimiento de sustitución - Página 3

Navegue en línea o descargue pdf Procedimiento de sustitución para Interruptor Dell PowerConnect B-DCX-4S Backbone. Dell PowerConnect B-DCX-4S Backbone 16 páginas. Power supply and filler panel
También para Dell PowerConnect B-DCX-4S Backbone: Procedimiento de sustitución (6 páginas)

Imprimir página
In this guide
•
ESD precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Replacing a PowerConnect B-DCX-4S Chassis . . . . . . . . . . . . . . . . . . . . . . . . 3
•
Cable routing table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
•
ESD precautions
The PowerConnect B-DCX-4S contains electrostatic discharge (ESD) sensitive FRUs. When working with any
PowerConnect B-DCX-4S FRU, use correct ESD procedures.
•
Wear a wrist grounding strap connected to chassis ground (if the PowerConnect B-DCX-4S is plugged in) or a
bench ground.
•
Store ESD-sensitive components in antistatic packaging.
Replacing a PowerConnect B-DCX-4S Chassis
This section describes how to remove and replace the PowerConnect B-DCX-4S chassis (with its backplane). The
basic steps are:
1.
2.
3.
4.
5.
6.
7.
8.
Reconnecting the system to the network and fabric
9.
NOTE
The PowerConnect B-DCX-4S must be removed from the fabric and powered off to perform this procedure. Contact
your support provider if you have any questions about whether the chassis requires replacement.
Time required
The chassis replacement takes approximately 3 hours.
PowerConnect B-DCX-4S Chassis Replacement Procedure
53-1001800-01
3