Miller XT30i Manual del usuario - Página 18
Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller XT30i. Miller XT30i 44 páginas.
Imprimir página
General
Operating Temperature
IP Code − Degree of protection provided by enclosure
Toppling or tilting
Torch −
The XT30i torch is intended for handheld use only. The torch conforms to IEC 60974-7 when used with the Spectrum 500i.
Do not use this torch in combination with any other machines.
Gas Type
Gas Quality
Gas Inlet Flow and Pressure
Gas Filtering
Mild Steel capacities (see Section 6-2 for cutting speeds vs material type and thickness)
Cooling Method
Duty Cycle of Torch
Rating of Electrical Controls (Trigger)
Rating of Electrical Controls (Cup)
Approved Systems
Trigger Protection
Safety Devices
Rated Capacity (edge start)
Sever Cut Capacity (edge start)
Pierce Capacity
*Travel speeds are approximately 80% of maximum.
Dimensions
Weight
Requirements for the torch connection
S
Use only compressed air which is free from dirt, oil, and water.
S
Ensure that the connections are properly assigned and tightened.
S
For torch replacement, see Miller torch manual Part No. OM-254 449
S
Ensure correct air pressure (flow pressure) and airflow (volume) are set. Insufficient airflow can lead to the torch overheating.
*This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.
OM-256 118 Page 14
.
A complete Parts List is available at www.MillerWelds.com
−15 to 40 C (5 to 104 F)
IP − International Protection
2 − No ingress of foreign objects
12.5 mm (0.5 in.)
3 − No harmful ingress spraying
C − AC line circuits protected
against ingress of tool . 2.5 mm
dia x 100 mm long (0.1 in. x 4 in.)
S − Fan stationary during water
Up to 15 incline
Clean, moisture−free,
142 L/min (5.0 SCFM)
Particulates to 5 microns
100% at 30 Amps
30 VDC at .1 Amps
30 VDC at 1 Amp
Spectrum 500i w/XT30i torch
Safety trigger guard
Safety interlock devices shut
down power source
457 mm/min (3/8 in. At 18 ipm)*
15.9 mm (5/8 in.)
4.8 mm (3/16 in.)
362 mm (14-1/4 in.) L
210 mm (8-1/4 in.) W
286 mm (11-1/4 in.) H
12.5 kg (27.6 lb) including torch
IP23CS*
water
test
Air or Nitrogen
oil−free
621 kPa (90 PSI)
Air
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
−−
827 kPa (120 PSI)
Min
Max
−−
−−
−−
−−
−−
−−
− −
− −
− −
− −
−−
−−
−−
−−
−−
−−
− −
− −
− −
− −