Miller XT30i Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller XT30i. Miller XT30i 44 páginas.

4-2. Duty Cycle And Overheating

3-1/2 Minutes Cutting

Overheating

Dimensions And Weight

12.5 kg (27.6 lb)

including torch

1.0 kg (2.2 lb)

A complete Parts List is available at www.MillerWelds.com

35% duty cycle

6-1/2 Minutes Resting

Minutes

362 mm

(14-1/4 in.)

30 mm

(1-3/16 in.)

38mm

(1-1/2 in.)

Reduce Duty Cycle

210 mm

(8-1/4 in.)

286 mm

(11-1/4 in.)

222 mm

(8-3/4 in.)

Duty Cycle is percentage of 10 min-

utes that unit can cut at rated load

without overheating.

If unit overheats, thermostat(s)

opens, output stops, Temperature

trouble light goes On, and cooling

fan runs. Wait fifteen minutes for

unit to cool or temperature light to

go off. Reduce amperage or duty

cycle before cutting or gouging.

NOTICE − Exceeding duty cycle

can damage unit and void warranty.

sduty1 5/95 / Ref. 244 405-A

Do not move or operate unit

where it could tip.

loc_2 3/96 - Ref. 244 405-A

Ref. 253 554-A

OM-256 118 Page 15