AquaScape 96031 Manual de instrucciones y mantenimiento - Página 5

Navegue en línea o descargue pdf Manual de instrucciones y mantenimiento para Sistemas de filtración de agua AquaScape 96031. AquaScape 96031 20 páginas. Automatic dosing systems for ponds/ fountains
También para AquaScape 96031: Manual de instrucciones y mantenimiento (20 páginas), Instrucciones y mantenimiento (16 páginas), Instrucciones y mantenimiento (20 páginas)

To Calculate Pond Size in US Gallons:

Length (in ft) x Width (in ft) x Average Depth (in ft) x 7.48

TIP: For new or problem ponds and fountains, we

recommend using the X2 button for the first two

weeks of operation.

SYSTEM INSTALLATION OPTIONS

Mounting Plate

Fence/post

☎

aquascapeinc.com |

CAN (866) 766-3426 |

• Priming Mode - When first setting up the system or when

adding a new water treatment pouch, the system will need

to be primed in order to push the water treatment through

the length of output tubing. To enter the priming mode,

hold the x2 button for 3 seconds until the LED indicator

light begins to flash. The system will begin to slowly prime

itself at this time. The priming mode will automatically turn

off after approximately ten minutes, returning to normal

operation. The priming mode can be exited at any time by

pressing the x2 button while the unit is priming (Ex. 7).

Ex. 6

• Be sure to inspect your dosing system often to verify

that the treatment pouch is not empty and ensure proper

functionality of the system. Use the chart on page 8 of

this manual to approximate how often you will need to

replace your selected water treatment.

In Ground

☎

US (866) 877-6637

Ex. 7

Soil depth