AquaScape 96031 Instructie- en onderhoudshandleiding - Pagina 5
Blader online of download pdf Instructie- en onderhoudshandleiding voor {categorie_naam} AquaScape 96031. AquaScape 96031 20 pagina's. Automatic dosing systems for ponds/ fountains
Ook voor AquaScape 96031: Instructie- en onderhoudshandleiding (20 pagina's), Instructies en onderhoud (16 pagina's), Instructies en onderhoud (20 pagina's)
Pagina afdrukken
To Calculate Pond Size in US Gallons:
Length (in ft) x Width (in ft) x Average Depth (in ft) x 7.48
TIP: For new or problem ponds and fountains, we
recommend using the X2 button for the first two
weeks of operation.
SYSTEM INSTALLATION OPTIONS
Mounting Plate
Mounting Plate
Fence/post
☎
aquascapeinc.com |
CAN (866) 766-3426 |
• Priming Mode - When first setting up the system or when
adding a new water treatment pouch, the system will need
to be primed in order to push the water treatment through
the length of output tubing. To enter the priming mode,
hold the x2 button for 3 seconds until the LED indicator
light begins to flash. The system will begin to slowly prime
itself at this time. The priming mode will automatically turn
off after approximately ten minutes, returning to normal
operation. The priming mode can be exited at any time by
pressing the x2 button while the unit is priming (Ex. 7).
Ex. 6
• Be sure to inspect your dosing system often to verify
that the treatment pouch is not empty and ensure proper
functionality of the system. Use the chart on page 8 of
this manual to approximate how often you will need to
replace your selected water treatment.
In Ground
☎
US (866) 877-6637
Ex. 7
Soil depth
5