AquaScape 96031 지침 및 유지보수 매뉴얼 - 페이지 5
{카테고리_이름} AquaScape 96031에 대한 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape 96031 20 페이지. Automatic dosing systems for ponds/ fountains
AquaScape 96031에 대해서도 마찬가지입니다: 지침 및 유지보수 매뉴얼 (20 페이지), 지침 및 유지 관리 (16 페이지), 지침 및 유지 관리 (20 페이지)
페이지 인쇄
To Calculate Pond Size in US Gallons:
Length (in ft) x Width (in ft) x Average Depth (in ft) x 7.48
TIP: For new or problem ponds and fountains, we
recommend using the X2 button for the first two
weeks of operation.
SYSTEM INSTALLATION OPTIONS
Mounting Plate
Mounting Plate
Fence/post
☎
aquascapeinc.com |
CAN (866) 766-3426 |
• Priming Mode - When first setting up the system or when
adding a new water treatment pouch, the system will need
to be primed in order to push the water treatment through
the length of output tubing. To enter the priming mode,
hold the x2 button for 3 seconds until the LED indicator
light begins to flash. The system will begin to slowly prime
itself at this time. The priming mode will automatically turn
off after approximately ten minutes, returning to normal
operation. The priming mode can be exited at any time by
pressing the x2 button while the unit is priming (Ex. 7).
Ex. 6
• Be sure to inspect your dosing system often to verify
that the treatment pouch is not empty and ensure proper
functionality of the system. Use the chart on page 8 of
this manual to approximate how often you will need to
replace your selected water treatment.
In Ground
☎
US (866) 877-6637
Ex. 7
Soil depth
5