HP ProCurve 1600M Manual del revisor - Página 16

Navegue en línea o descargue pdf Manual del revisor para Interruptor HP ProCurve 1600M. HP ProCurve 1600M 27 páginas. Redundant power supply
También para HP ProCurve 1600M: Hoja de especificaciones (12 páginas), Léeme primero (8 páginas), Manual complementario (2 páginas), Manual complementario (2 páginas), Manual de instalación (28 páginas), Manual de instalación (36 páginas), Manual de instalación (28 páginas), Manual de configuración rápida (2 páginas), Manual de configuración rápida (4 páginas), Manual del usuario (8 páginas), Suplemento del manual (28 páginas), Léeme primero (16 páginas), Instalación y retirada (2 páginas), Manual de instalación (12 páginas), Manual de planificación y ejecución (40 páginas), Instrucciones de desmontaje del producto al final de su vida útil (2 páginas), Manual de instalación (46 páginas), Manual de diagnóstico (2 páginas), Instrucciones de desmontaje (2 páginas)

Imprimir página

HP ProCurve Routing Switch 9308M / 9304M Reviewer's Guide

2.7.2 Layer 3 and Layer 4 Filtering

At Layer 3 and Layer 4, these filters available are:

IP Filters

�

Inbound and/or outbound IP addresses

�

Protocol types (UDP, TCP, etc.)

�

Port numbers or ranges of numbers (ftp, http, etc.)

�

Specific RIP routes inbound

�

Specific advertised RIP routes outbound

�

RIP redistribution (conversion of OSPF routes to

RIP)

�

OSPF redistribution (conversion of RIP routes to

OSPF)

AppleTalk Filters

�

Zone filters - ability to filter resource access from other zones

�

Network filters - Specific advertised zones in the routing packets

2.8 Flexibility

The HP ProCurve routing switches have been designed with flexibility and high port density in mind.

Any module type can be plugged into any of the module slots. The only requirement is that one, and

only one, module with management must be installed. The modules are hot swappable. Available

module types are:

HP ProCurve 9300 10/100 Module (24 port)

HP ProCurve 9300 10/100 Management Module (16 port)

HP ProCurve 9300 100Base-FX Module (24 port, MT-RJ connectors) MT-RJ is a new connector type

that allows full duplex 100Base-FX connections in the same space as a RJ-45 connection. Adapter

cables for SC to MT-RJ conversion are available from 3

HP ProCurve 9300 Gigabit SX Module (8 port, SC connectors)

HP ProCurve 9300 Gigabit SX Management Module (8 port, SC connectors) Works with 62.5/125

multi-mode fiber cable at up to 220M, or 50/125 multi-mode fiber cable at up to 500m.

HP ProCurve 9300 Gigabit SX/LX Module(4 ports SX, 4 ports LX, SC connectors) SX connections

work with 62.5/125 multi-mode fiber cable at up to 220M, or 50/125 multi-mode fiber cable at up to

500m connections. LX connections work with single-mode fiber cable up to 5km, or with either

62.5/125 or 50/125 multi-mode fiber cable up to 550m (a mode-conditioning cable may be required

for multi-mode use on some older fiber-optic cables per IEEE 802.3z).

HP ProCurve 9300 Gigabit SX/LX Management Module (4 ports SX, 4 ports LX, SC connectors)

Same comments as for the card above.

A fully loaded HP ProCurve Routing Switch 9304M can have (88) 10/100Mbps ports or (32) Gigabit

ports in a box only 22.8cm (9") in height and 13.8kg (30.8lbs).

A fully loaded HP ProCurve Routing Switch 9308M can have (188) 10/100Mbps ports or (64) Gigabit

ports in a box only 52.7cm (20.75") in height and 26kg (57.3lbs).

IPX Filters

�

Inbound and/or outbound IPX addresses

�

Inbound and outbound forward filters

(Allows a remote IPX client access to a restricted-

access server)

�

Specific RIP routes inbound

�

Specific advertised RIP routes outbound

�

Specific advertised SAP routes (128 filters max

per chassis)

party sources.

Revision 4.0 – 4/1/1999

Page: 16 of