HP ProCurve 1600M Manual de instalación - Página 10

Overview

Introduction

The HP DC ProCurve switches 4000M and 8000M are for the Central

Office (CO) and other environments requiring DC powered NEBS

compliant switches.

Some of the switch features are:

• Fully NEBS Level-3 compliant, including earthquake Zone-4.

• Power: -48 V or -60 V DC nominal, 8 amps maximum - typically

4 amps at -48 V DC fully loaded.

• Operates from a single power supply.

• An optional load-sharing second power supply provides redundant

power when connected to an independent DC feed.

• Performance:

— <10 µ s (LIFO) latency

— 4.67 million pps throughput

(64 Byte packets; 3.8 Gbps backplane)

— Address table size: 10,000 entries

• Management:

— SNMPv1/v2c

— RMON groups 1 (stats), 2 (history), 3 (alarm), 9 MON

— RFC 1493 Bridge MIB, RS-232C DB-9 local console port

— extensive web-based network monitoring capability

• Rack mount kit available for HP Seismic Rack and HP non-seismic

rack systems.

The DC 4000M and 8000M ProCurve products are the NEBS-compliant

versions of the AC 4000M and 8000M products. Aside from the DC power

supplies and optional seismic mounting hardware, the appearance, form

factor, networking features and functionality of the DC versions of the

products are the same as the AC versions.

Additional specifications and configuration information on the ProCurve

family is available at www.hp.com/go/procurve.

Chapter 1