HP ProCurve 1600M Manual de instalación - Página 23

CAUTION

WARNING

Connecting to the DC Power Source

Disconnect DC power from the power supply BEFORE installing or

removing the supply. Not disconnecting the power first can damage the

power supply or switch. Read this manual for proper handling

procedures.

To avoid power supply or switch damage, do not attempt to power-up the

power supply outside the switch chassis. The power supply requires a

load and other enabling signals to operate properly.

1.) The power supply cable is used as the main disconnect device

for this equipment.

2.) Make sure that all Central Office safety precautions are

carefully observed when connecting the power supply to the DC

power source.

3.) This product is to be installed only in Restricted Access Areas

(dedicated equipment rooms, equipment closets or the like) in

accordance with Articles 110-16 to 110-18 of National Electrical

Code, ANSI/NFFA 70.

4.) Installation should be performed only by qualified service

personnel.

Chapter 3

Connecting the DC Power Supply

Connecting to the DC Power Source