HP StorageWorks 2/140 - Director Switch Manual de instrucciones de instalación - Página 22

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Interruptor HP StorageWorks 2/140 - Director Switch. HP StorageWorks 2/140 - Director Switch 22 páginas. Director power cord advisory instruction
También para HP StorageWorks 2/140 - Director Switch: Nota de publicación (27 páginas), Nota de publicación (24 páginas), Nota de publicación (20 páginas), Nota de publicación (13 páginas), Nota de publicación (11 páginas), Nota de publicación (10 páginas), Instrucción (1 páginas)

Installation Instructions

Power-On Self Test

Once the Director 2/140 is connected to a power source, a Power-On Self Test (POST)

is initiated. The following sequence of events occur during the POST:

1. Amber LEDs on both CTP cards and all FPM cards illuminate momentarily.

2. The green LED on each CTP card (active and backup) lights as the card is tested

and FPM cards are tested.

3. Green LEDs associated with Fibre Channel ports sequentially illuminate as the

ports are tested.

After successful POST completion, the green power LED on the front bezel, green

LED on the active CTP card, and green PWR OK LEDs on both power supplies

remain illuminated.

If a POST error or other malfunction occurs, refer to the "Maintenance Analysis

Procedures" section in the hp StorageWorks director 2/140 service manual.

For additional information on installing and configuring the Director 2/140, please see

the hp StorageWorks director 2/140 installation guide.

director 2/140 rack mount kit installation instructions