HP Xw460c - ProLiant - Blade Workstation Manual de preguntas frecuentes - Página 5

Navegue en línea o descargue pdf Manual de preguntas frecuentes para Interruptor HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 14 páginas. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
También para HP Xw460c - ProLiant - Blade Workstation: Manual de aplicación (35 páginas), Manual de prevención de errores (12 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Manual de instalación (2 páginas), Póster de instalación (9 páginas), Manual de instalación (33 páginas), Manual de gestión (28 páginas), Manual de hardware (23 páginas), Visión general (35 páginas), Manual del usuario (33 páginas), Manual de optimización (13 páginas), Garantía limitada (10 páginas), Manual de instrucciones de instalación (10 páginas), Manual de instrucciones de instalación (8 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (2 páginas)

ISS Technology Update

Volume 6, Number 9

When port monitoring is enabled, a warning icon appears on the Virtual Connect Manager page, as shown in Figure 3-1.

If port monitoring is configured and enabled within the Virtual Connect domain, Ethernet data from the monitored ports is

replicated on the network analyzer port, for that reason it is important to verify the Network Analyzer is set up properly to

avoid passing traffic back onto the network.

Up to 16 ports can be monitored, which are chosen from the Select Monitored Ports screen in Virtual Connect, as shown in

Figure 3-2.

Figure 3-2. Select Monitored Ports screen in Virtual Connect

To capture Local Area Network (LAN) traffic for a monitored port, a program that monitors data traveling over the network,

typically referred to as a network sniffer (such as WireShark, www.wireshark.org) is also required. A network sniffer captures

every Ethernet frame it sees and displays it on a screen. It is up to an administrator to create filters to look for specific patterns

within that traffic. Instead of using a sniffer program, a network analyzer could be used, which is a piece of hardware

specifically dedicated to this function

Detailed instructions about using Port Monitoring can be found in the "HP Virtual Connect for c-Class BladeSystem User Guide"

at http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00865618/c00865618.pdf.