HP Xw460c - ProLiant - Blade Workstation Manuale delle domande frequenti - Pagina 5

Sfoglia online o scarica il pdf Manuale delle domande frequenti per Interruttore HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 14. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Anche per HP Xw460c - ProLiant - Blade Workstation: Manuale di implementazione (35 pagine), Manuale di prevenzione degli errori (12 pagine), Libro bianco tecnico (12 pagine), Aggiornamento del firmware (9 pagine), Manuale di installazione (2 pagine), Poster di impostazione (9 pagine), Manuale di installazione (33 pagine), Manuale di gestione (28 pagine), Manuale hardware (23 pagine), Panoramica (35 pagine), Manuale d'uso (33 pagine), Manuale di ottimizzazione (13 pagine), Garanzia limitata (10 pagine), Manuale di istruzioni per l'installazione (10 pagine), Manuale di istruzioni per l'installazione (8 pagine), Istruzioni per l'installazione (4 pagine), Istruzioni per l'installazione (2 pagine)

ISS Technology Update

Volume 6, Number 9

When port monitoring is enabled, a warning icon appears on the Virtual Connect Manager page, as shown in Figure 3-1.

If port monitoring is configured and enabled within the Virtual Connect domain, Ethernet data from the monitored ports is

replicated on the network analyzer port, for that reason it is important to verify the Network Analyzer is set up properly to

avoid passing traffic back onto the network.

Up to 16 ports can be monitored, which are chosen from the Select Monitored Ports screen in Virtual Connect, as shown in

Figure 3-2.

Figure 3-2. Select Monitored Ports screen in Virtual Connect

To capture Local Area Network (LAN) traffic for a monitored port, a program that monitors data traveling over the network,

typically referred to as a network sniffer (such as WireShark, www.wireshark.org) is also required. A network sniffer captures

every Ethernet frame it sees and displays it on a screen. It is up to an administrator to create filters to look for specific patterns

within that traffic. Instead of using a sniffer program, a network analyzer could be used, which is a piece of hardware

specifically dedicated to this function

Detailed instructions about using Port Monitoring can be found in the "HP Virtual Connect for c-Class BladeSystem User Guide"

at http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00865618/c00865618.pdf.