HP Xw460c - ProLiant - Blade Workstation Sıkça Sorulan Sorular Kılavuzu - Sayfa 5

Anahtar HP Xw460c - ProLiant - Blade Workstation için çevrimiçi göz atın veya pdf Sıkça Sorulan Sorular Kılavuzu indirin. HP Xw460c - ProLiant - Blade Workstation 14 sayfaları. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ayrıca HP Xw460c - ProLiant - Blade Workstation için: Uygulama Kılavuzu (35 sayfalar), Hata Önleme Kılavuzu (12 sayfalar), Teknik Beyaz Kitap (12 sayfalar), Ürün Yazılımı Güncellemesi (9 sayfalar), Kurulum Kılavuzu (2 sayfalar), Kurulum Posteri (9 sayfalar), Kurulum Kılavuzu (33 sayfalar), Yönetim Kılavuzu (28 sayfalar), Donanım Kılavuzu (23 sayfalar), Genel Bakış (35 sayfalar), Kullanıcı Kılavuzu (33 sayfalar), Optimizasyon Kılavuzu (13 sayfalar), Sınırlı Garanti (10 sayfalar), Kurulum Talimatları Kılavuzu (10 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları (2 sayfalar)

ISS Technology Update

Volume 6, Number 9

When port monitoring is enabled, a warning icon appears on the Virtual Connect Manager page, as shown in Figure 3-1.

If port monitoring is configured and enabled within the Virtual Connect domain, Ethernet data from the monitored ports is

replicated on the network analyzer port, for that reason it is important to verify the Network Analyzer is set up properly to

avoid passing traffic back onto the network.

Up to 16 ports can be monitored, which are chosen from the Select Monitored Ports screen in Virtual Connect, as shown in

Figure 3-2.

Figure 3-2. Select Monitored Ports screen in Virtual Connect

To capture Local Area Network (LAN) traffic for a monitored port, a program that monitors data traveling over the network,

typically referred to as a network sniffer (such as WireShark, www.wireshark.org) is also required. A network sniffer captures

every Ethernet frame it sees and displays it on a screen. It is up to an administrator to create filters to look for specific patterns

within that traffic. Instead of using a sniffer program, a network analyzer could be used, which is a piece of hardware

specifically dedicated to this function

Detailed instructions about using Port Monitoring can be found in the "HP Virtual Connect for c-Class BladeSystem User Guide"

at http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00865618/c00865618.pdf.