HP Xw460c - ProLiant - Blade Workstation Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Interruptor HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 páginas. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
También para HP Xw460c - ProLiant - Blade Workstation: Manual de aplicación (35 páginas), Manual de prevención de errores (12 páginas), Libro Blanco técnico (12 páginas), Actualización del firmware (9 páginas), Manual de instalación (2 páginas), Manual de preguntas frecuentes (14 páginas), Póster de instalación (9 páginas), Manual de instalación (33 páginas), Manual de gestión (28 páginas), Manual de hardware (23 páginas), Visión general (35 páginas), Manual de optimización (13 páginas), Garantía limitada (10 páginas), Manual de instrucciones de instalación (10 páginas), Manual de instrucciones de instalación (8 páginas), Instrucciones de instalación (4 páginas), Instrucciones de instalación (2 páginas)

HP BIOS Serial Console/EMS Support

Settings and Configuration

In This Section

.........................................................................................................................15

Support............................................................................................................17

BIOS Serial Console supports console redirection of POST error messages and

configuration utilities and is disabled in the ROM by default. EMS support is

enabled in the OS by default, but also requires system ROM support. This section

takes you through RBSU configuration, basic OS initialization, and terminal

emulation for console redirection.

RBSU displays and modifies the system configuration settings of a server. The

figures in this section show settings for BIOS Serial Console options on the

RBSU menu. Except for the following figure, these screens are shown with

ANSI emulation.

Press the Enter key while BIOS Serial Console is selected on the RBSU main

menu to display the options.

....................................................................................................................15

.......................................................................................17

Services................................................................................................18

.....................................................................................19

NOTE: On some newer servers, the BIOS Serial Console default will

be AUTO instead of disabled. During the boot process, the server will

check for the presence of a VT100 compatible client running at 9600

Baud connected to the server and automatically will enable the BIOS

Serial Console for that boot if one is found. This eliminates the need to

run RBSU with a local keyboard and monitor attached to enable the

BIOS Serial Console feature.

.............................................................................9