HP Xw460c - ProLiant - Blade Workstation Kullanıcı Kılavuzu - Sayfa 9

Anahtar HP Xw460c - ProLiant - Blade Workstation için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. HP Xw460c - ProLiant - Blade Workstation 33 sayfaları. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ayrıca HP Xw460c - ProLiant - Blade Workstation için: Uygulama Kılavuzu (35 sayfalar), Hata Önleme Kılavuzu (12 sayfalar), Teknik Beyaz Kitap (12 sayfalar), Ürün Yazılımı Güncellemesi (9 sayfalar), Kurulum Kılavuzu (2 sayfalar), Sıkça Sorulan Sorular Kılavuzu (14 sayfalar), Kurulum Posteri (9 sayfalar), Kurulum Kılavuzu (33 sayfalar), Yönetim Kılavuzu (28 sayfalar), Donanım Kılavuzu (23 sayfalar), Genel Bakış (35 sayfalar), Optimizasyon Kılavuzu (13 sayfalar), Sınırlı Garanti (10 sayfalar), Kurulum Talimatları Kılavuzu (10 sayfalar), Kurulum Talimatları Kılavuzu (8 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları (2 sayfalar)

HP BIOS Serial Console/EMS Support

Settings and Configuration

In This Section

.........................................................................................................................15

Support............................................................................................................17

BIOS Serial Console supports console redirection of POST error messages and

configuration utilities and is disabled in the ROM by default. EMS support is

enabled in the OS by default, but also requires system ROM support. This section

takes you through RBSU configuration, basic OS initialization, and terminal

emulation for console redirection.

RBSU displays and modifies the system configuration settings of a server. The

figures in this section show settings for BIOS Serial Console options on the

RBSU menu. Except for the following figure, these screens are shown with

ANSI emulation.

Press the Enter key while BIOS Serial Console is selected on the RBSU main

menu to display the options.

....................................................................................................................15

.......................................................................................17

Services................................................................................................18

.....................................................................................19

NOTE: On some newer servers, the BIOS Serial Console default will

be AUTO instead of disabled. During the boot process, the server will

check for the presence of a VT100 compatible client running at 9600

Baud connected to the server and automatically will enable the BIOS

Serial Console for that boot if one is found. This eliminates the need to

run RBSU with a local keyboard and monitor attached to enable the

BIOS Serial Console feature.

.............................................................................9