HTC HD2 Manual de reparación - Página 3

Navegue en línea o descargue pdf Manual de reparación para Teléfono móvil HTC HD2. HTC HD2 4 páginas. Lcd & touch screen repair
También para HTC HD2: Manual del usuario (31 páginas), Manual de inicio rápido (44 páginas), Manual de inicio rápido (44 páginas)

Imprimir página
HTC HD2 Manual de reparación
•
Then remove the keyboard flex cable connector from the motherboard. Do this by using a safe open pry tool to lift
up on the alligator clip, and remove the ribbon. Remove the label located below the battery.
•
Pop the white cable from the GPS unit located in the left top corner and work your way to the motherboard.
Remove the GPS board
•
Now, release the volume flex from the housing. Use a safe pry tool to remove the adhesive holding the
motherboard flex cable in place.
•
You can now flip the motherboard and flex to the side, exposing the LCD flex cable connector. Use a pry tool to
move the clip forward and release the cable as shown in Figure 3.
•
Use a hair dryer or heat gun to heat the front of the digitizer, working in quick movements for 1-2 minutes.
•
Slide a safe open pry tool along the edges to remove the metal housing from the screen assembly as shown in
Figure 4.
Figure 2
Figure 3