- ページ 3

携帯電話 HTC HD2のPDF 修理マニュアルをオンラインで閲覧またはダウンロードできます。HTC HD2 4 ページ。 Lcd & touch screen repair
HTC HD2 にも：ユーザーマニュアル (31 ページ), クイック・スタート・マニュアル (44 ページ), クイック・スタート・マニュアル (44 ページ)

•

Then remove the keyboard flex cable connector from the motherboard. Do this by using a safe open pry tool to lift

up on the alligator clip, and remove the ribbon. Remove the label located below the battery.

•

Pop the white cable from the GPS unit located in the left top corner and work your way to the motherboard.

Remove the GPS board

•

Now, release the volume flex from the housing. Use a safe pry tool to remove the adhesive holding the

motherboard flex cable in place.

•

You can now flip the motherboard and flex to the side, exposing the LCD flex cable connector. Use a pry tool to

move the clip forward and release the cable as shown in Figure 3.

•

Use a hair dryer or heat gun to heat the front of the digitizer, working in quick movements for 1-2 minutes.

•

Slide a safe open pry tool along the edges to remove the metal housing from the screen assembly as shown in

Figure 4.

Figure 2

Figure 3