HTC HD2 수리 매뉴얼 - 페이지 3

{카테고리_이름} HTC HD2에 대한 수리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HTC HD2 4 페이지. Lcd & touch screen repair
HTC HD2에 대해서도 마찬가지입니다: 사용자 설명서 (31 페이지), 빠른 시작 매뉴얼 (44 페이지), 빠른 시작 매뉴얼 (44 페이지)

페이지 인쇄
HTC HD2 수리 매뉴얼
•
Then remove the keyboard flex cable connector from the motherboard. Do this by using a safe open pry tool to lift
up on the alligator clip, and remove the ribbon. Remove the label located below the battery.
•
Pop the white cable from the GPS unit located in the left top corner and work your way to the motherboard.
Remove the GPS board
•
Now, release the volume flex from the housing. Use a safe pry tool to remove the adhesive holding the
motherboard flex cable in place.
•
You can now flip the motherboard and flex to the side, exposing the LCD flex cable connector. Use a pry tool to
move the clip forward and release the cable as shown in Figure 3.
•
Use a hair dryer or heat gun to heat the front of the digitizer, working in quick movements for 1-2 minutes.
•
Slide a safe open pry tool along the edges to remove the metal housing from the screen assembly as shown in
Figure 4.
Figure 2
Figure 3