Olympus BH2 Series Desmontaje, limpieza y montaje - Página 17

Navegue en línea o descargue pdf Desmontaje, limpieza y montaje para Microscopio Olympus BH2 Series. Olympus BH2 Series 45 páginas. Phase contrast
También para Olympus BH2 Series: Manual de solución de problemas y ajuste (46 páginas), Desmontaje, limpieza y montaje completos (23 páginas), Desmontaje, limpieza y montaje completos (40 páginas), Manual (6 páginas), Manual de instalación (9 páginas)

Use a needle-nose pliers to carefully reinstall the e-clip

into the ring groove in the end of the locking

thumbscrew (see

Figure

Figure 45 – Carefully reinstall the e-clip into ring groove

Remove the protective cardboard and the cloth or

tissue from the dovetail recess for the viewing head

(see

Figure

46).

Figure 46 – Remove protection for the exposed optics

This completes the overhaul of the BHSU/BHTU locking

thumbscrew.

The newly refurbished thumbscrew is

now ready to provide many more years of trouble-free

service (see

Figure

35).

Figure 47 – Refurbished thumbscrew is ready for use

Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames

45), to retain the thumbscrew.

Nosepiece Slide Mount

There were two versions of nosepiece slide mounts

used on the BHS/BHT microscopes. The older style is

shown in

Figure

48, and the newer style is shown in

Figure

49. Note that the nosepiece slide mounts rarely

require service but are included here for the sake of

completeness.

Figure 48 – Nosepiece slide mount (old style)

Figure 49 – Nosepiece slide mount (new style)

Remove the nosepiece slide mount from the BHS/BHT

stand per the following.

Carefully loosen and remove the nosepiece locking

thumbscrew from the pillar arm (see

Figure 50 – Remove the nosepiece locking thumbscrew

Figure

50).

Revision 1

Page 17 of 45