Olympus BH2 Series Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Microscopio Olympus BH2 Series. Olympus BH2 Series 9 páginas. Phase contrast
También para Olympus BH2 Series: Manual de solución de problemas y ajuste (46 páginas), Desmontaje, limpieza y montaje completos (23 páginas), Desmontaje, limpieza y montaje completos (40 páginas), Desmontaje, limpieza y montaje (45 páginas), Manual (6 páginas)
Imprimir página
2021/10/12 04:32
Back Plate
Drive Assembly
In this step we will install the ASI backplate and motor drive assembly as a unit. The ASI backplate will
be installed and clamped to the back of the microscope as shown only after the motor drive is
clamped onto the fine focus shaft of the microscope. Before installing the backplate and drive
assembly loosen but do not remove the horizontal and vertical adjustment screws. When these
screws are loosened the motor drive should move freely about in the horizontal and vertical
adjustment axis.
Alternatively the drive and the back plate can be installed separately. In this installation the drive is
removed from the back plate by removing the horizontal adjustment screw.
Horizontal adjustment screw
Applied Scientific Instrumentation - https://asiimaging.com/docs/
3/9
Olympus BH-2 Microscope Motor Drive Installation