Olympus BH2 Series 설치 매뉴얼 - 페이지 3

{카테고리_이름} Olympus BH2 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BH2 Series 9 페이지. Phase contrast
Olympus BH2 Series에 대해서도 마찬가지입니다: 문제 해결 및 조정 매뉴얼 (46 페이지), 완전한 분해, 청소 및 재조립 (23 페이지), 완전한 분해, 청소 및 재조립 (40 페이지), 분해, 청소 및 재조립 (45 페이지), 매뉴얼 (6 페이지)

2021/10/12 04:32

Back Plate

Drive Assembly

In this step we will install the ASI backplate and motor drive assembly as a unit. The ASI backplate will

be installed and clamped to the back of the microscope as shown only after the motor drive is

clamped onto the ﬁne focus shaft of the microscope. Before installing the backplate and drive

assembly loosen but do not remove the horizontal and vertical adjustment screws. When these

screws are loosened the motor drive should move freely about in the horizontal and vertical

adjustment axis.

Alternatively the drive and the back plate can be installed separately. In this installation the drive is

removed from the back plate by removing the horizontal adjustment screw.

Horizontal adjustment screw

Applied Scientiﬁc Instrumentation - https://asiimaging.com/docs/

3/9

Olympus BH-2 Microscope Motor Drive Installation