Olympus BH2 Series Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Микроскоп Olympus BH2 Series. Olympus BH2 Series 9 страниц. Phase contrast
Также для Olympus BH2 Series: Руководство по поиску и устранению неисправностей и настройке (46 страниц), Полная разборка, очистка и сборка (23 страниц), Полная разборка, очистка и сборка (40 страниц), Разборка, очистка и сборка (45 страниц), Руководство (6 страниц)

2021/10/12 04:32

Back Plate

Drive Assembly

In this step we will install the ASI backplate and motor drive assembly as a unit. The ASI backplate will

be installed and clamped to the back of the microscope as shown only after the motor drive is

clamped onto the ﬁne focus shaft of the microscope. Before installing the backplate and drive

assembly loosen but do not remove the horizontal and vertical adjustment screws. When these

screws are loosened the motor drive should move freely about in the horizontal and vertical

adjustment axis.

Alternatively the drive and the back plate can be installed separately. In this installation the drive is

removed from the back plate by removing the horizontal adjustment screw.

Horizontal adjustment screw

Applied Scientiﬁc Instrumentation - https://asiimaging.com/docs/

3/9

Olympus BH-2 Microscope Motor Drive Installation