Accurate Technology Digi Scale Model 20 Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Accurate Technology Digi Scale Model 20. Accurate Technology Digi Scale Model 20 17 páginas.
Imprimir páginaShortening Scales
To shorten Digi Scale follow these steps:
The scale has stainless-steel wires pressed into the side that could be damaged if not
cut properly.
1. Clamp the wires so they do not pull away from the extrusion.
2. Using a hacksaw, cut through the aluminum extrusion.
3. Use a file or sanding tool to chamfer the cut end to approximately the
specifications shown in the illustration.
4. Remove all burrs.
5. Test the shortened scale by sliding a Encoder on. There should not be any
binding.
Wires
Accurate Technology Digi Scale
.07" (2mm)
.25" (6mm)
Wires
Page 8 of 17