Epson 11880 - Stylus Pro Color Inkjet Printer Manual de instalación y desembalaje - Página 15

Navegue en línea o descargue pdf Manual de instalación y desembalaje para Impresora Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 páginas. Stylus pro11880
También para Epson 11880 - Stylus Pro Color Inkjet Printer: Manual de consulta rápida (14 páginas), Folleto (1 páginas), Folleto y especificaciones (8 páginas), Manual de la red (46 páginas), Manual de información del producto (10 páginas), Garantía limitada (12 páginas), Folleto y especificaciones (7 páginas), Folleto y especificaciones (8 páginas)

5. Hold the ink cartridge with the arrow mark

facing up and pointing to the rear of the

printer, and then insert it in the slot as far as it

will go until it clicks.

Note:

Be sure to install all nine ink cartridges; otherwise,

the ink charging does not start.

6. After inserting all ink cartridges in their

corresponding slot, close the ink compartment

cover.

The printer starts initial ink charging, and the

Power light flashes (for about 10 minutes).

Caution:

Never do the following while the Power light

is flashing; otherwise damage may occur:

❏ Turn off the printer

❏ Unplug the power cord

❏ Open the front cover

❏ Move the paper lever to the released

position

❏ Open the ink compartment cover

❏ Remove the maintenance tank

7. PAPER OUT. LOAD PAPER appears on the LCD

panel, which indicates initial ink charging is

completed.

Confirming the Printing

Loading the roll paper

To load the roll paper onto the printer, follow the

instructions below.

1. Open the roll paper cover.

2. With the fixed paper stopper (gray) on the

right, pick up the paper roll and place it in the

paper roll holder. Then move the paper roll to

the right.

Warning:

The paper roll is heavy so have two people

pick it up by the paper stoppers at both ends.