Epson 11880 - Stylus Pro Color Inkjet Printer Руководство по распаковке и настройке - Страница 15

Просмотреть онлайн или скачать pdf Руководство по распаковке и настройке для Принтер Epson 11880 - Stylus Pro Color Inkjet Printer. Epson 11880 - Stylus Pro Color Inkjet Printer 28 страниц. Stylus pro11880
Также для Epson 11880 - Stylus Pro Color Inkjet Printer: Краткое справочное руководство (14 страниц), Брошюра (1 страниц), Брошюра и технические характеристики (8 страниц), Руководство по работе с сетью (46 страниц), Руководство по информации о продукте (10 страниц), Ограниченная гарантия (12 страниц), Брошюра и технические характеристики (7 страниц), Брошюра и технические характеристики (8 страниц)

5. Hold the ink cartridge with the arrow mark

facing up and pointing to the rear of the

printer, and then insert it in the slot as far as it

will go until it clicks.

Note:

Be sure to install all nine ink cartridges; otherwise,

the ink charging does not start.

6. After inserting all ink cartridges in their

corresponding slot, close the ink compartment

cover.

The printer starts initial ink charging, and the

Power light flashes (for about 10 minutes).

Caution:

Never do the following while the Power light

is flashing; otherwise damage may occur:

❏ Turn off the printer

❏ Unplug the power cord

❏ Open the front cover

❏ Move the paper lever to the released

position

❏ Open the ink compartment cover

❏ Remove the maintenance tank

7. PAPER OUT. LOAD PAPER appears on the LCD

panel, which indicates initial ink charging is

completed.

Confirming the Printing

Loading the roll paper

To load the roll paper onto the printer, follow the

instructions below.

1. Open the roll paper cover.

2. With the fixed paper stopper (gray) on the

right, pick up the paper roll and place it in the

paper roll holder. Then move the paper roll to

the right.

Warning:

The paper roll is heavy so have two people

pick it up by the paper stoppers at both ends.