Epson 11880 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼 - 페이지 15

{카테고리_이름} Epson 11880 - Stylus Pro Color Inkjet Printer에 대한 포장 풀기 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 11880 - Stylus Pro Color Inkjet Printer 28 페이지. Stylus pro11880
Epson 11880 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (14 페이지), 브로셔 (1 페이지), 브로셔 및 사양 (8 페이지), 네트워크 매뉴얼 (46 페이지), 제품 정보 매뉴얼 (10 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (7 페이지), 브로셔 및 사양 (8 페이지)

페이지 인쇄
Epson 11880 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼
5. Hold the ink cartridge with the arrow mark
facing up and pointing to the rear of the
printer, and then insert it in the slot as far as it
will go until it clicks.
Note:
Be sure to install all nine ink cartridges; otherwise,
the ink charging does not start.
6. After inserting all ink cartridges in their
corresponding slot, close the ink compartment
cover.
The printer starts initial ink charging, and the
Power light flashes (for about 10 minutes).
c
Caution:
Never do the following while the Power light
is flashing; otherwise damage may occur:
❏ Turn off the printer
❏ Unplug the power cord
❏ Open the front cover
❏ Move the paper lever to the released
position
❏ Open the ink compartment cover
❏ Remove the maintenance tank
7. PAPER OUT. LOAD PAPER appears on the LCD
panel, which indicates initial ink charging is
completed.

Confirming the Printing

Loading the roll paper
To load the roll paper onto the printer, follow the
instructions below.
1. Open the roll paper cover.
2. With the fixed paper stopper (gray) on the
right, pick up the paper roll and place it in the
paper roll holder. Then move the paper roll to
the right.
w
Warning:
The paper roll is heavy so have two people
pick it up by the paper stoppers at both ends.
13