Cisco ASR 920 series Manual de instalación - Página 38
Navegue en línea o descargue pdf Manual de instalación para Interruptor Cisco ASR 920 series. Cisco ASR 920 series 42 páginas. Aggregation services router
También para Cisco ASR 920 series: Manual de instalación (36 páginas), Primeros pasos (6 páginas), Manual de instalación del hardware (46 páginas), Manual (36 páginas)
Imprimir página
Connect a Management Ethernet Cable
Table 1: EIA Console Port
Label
1
2
Step 3
Connect the DB-9 end of the console cable to the DB-9 end of the terminal.
Step 4
To communicate with the router, start a terminal emulator application, such as Microsoft Windows HyperTerminal. This
software should be configured with the following parameters:
• 9600 baud
• 8 data bits
• no parity
• 1 stop-bit
• no flow control
Connect a Management Ethernet Cable
When using the Ethernet Management port in the default mode (speed-auto and duplex-auto) the port operates
in the auto-MDI/MDI-X mode. The port automatically provides the correct signal connectivity through the
Auto-MDI/MDI-X feature. The port automatically senses a crossover or straight-through cable and adapts to
it.
However, when the Ethernet Management port is configured to a fixed speed (10, 100, or 1000 Mbps) through
command-line interface (CLI) commands, the port is forced to the MDI mode.
When in a fixed-speed configuration and MDI mode:
• Use a crossover cable to connect to an MDI port
• Use a straight-through cable to connect to an MDI-X port
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
38
Component
EIA Console port
USB-to-RJ45 adapter
Installing the Cisco ASR 920 Series Router
Label
Component
3
RJ-45 to DB-9 cable
4
Desktop or system