Digisol DG-GS4110 Manual - Página 7

Navegue en línea o descargue pdf Manual para Interruptor Digisol DG-GS4110. Digisol DG-GS4110 12 páginas. 8 port l2 gigabit ethernet web managed switch with 2 gigabit sfp ports
También para Digisol DG-GS4110: Conexión y configuración (3 páginas)

Imprimir página
Digisol DG-GS4110 Manual

Login Web-based Management

In order to login and configure the switch via an Ethernet connection, the PC must have an IP
address in the same subnet as the switch. For example, if the switch has an IP address of
192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 ~
254), and a subnet mask of 255.255.255.0
Open the web browser and enter 192.168.0.1 (the factory-default IP address) in the address bar.
Then press <Enter>.
Enter the IP address in the web browser
NOTE: The switch's factory default IP address is 192.168.0.1 with a subnet mask of
To log in to the switch, the IP address of your PC should be set in the same subnet as that of the
switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254). Subnet Mask is
255.255.255.0. 255.255.255.0
When the following logon dialog box appears, enter the password then click OK.
By default, the username is admin and the password is admin.