Digisol DG-GS4110 매뉴얼 - 페이지 7

{카테고리_이름} Digisol DG-GS4110에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GS4110 12 페이지. 8 port l2 gigabit ethernet web managed switch with 2 gigabit sfp ports
Digisol DG-GS4110에 대해서도 마찬가지입니다: 연결 및 구성 (3 페이지)

페이지 인쇄
Digisol DG-GS4110 매뉴얼

Login Web-based Management

In order to login and configure the switch via an Ethernet connection, the PC must have an IP
address in the same subnet as the switch. For example, if the switch has an IP address of
192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 ~
254), and a subnet mask of 255.255.255.0
Open the web browser and enter 192.168.0.1 (the factory-default IP address) in the address bar.
Then press <Enter>.
Enter the IP address in the web browser
NOTE: The switch's factory default IP address is 192.168.0.1 with a subnet mask of
To log in to the switch, the IP address of your PC should be set in the same subnet as that of the
switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254). Subnet Mask is
255.255.255.0. 255.255.255.0
When the following logon dialog box appears, enter the password then click OK.
By default, the username is admin and the password is admin.