- ページ 7

スイッチ Digisol DG-GS4110のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Digisol DG-GS4110 12 ページ。 8 port l2 gigabit ethernet web managed switch with 2 gigabit sfp ports
Digisol DG-GS4110 にも：接続と設定 (3 ページ)

ページを印刷する

Login Web-based Management

In order to login and configure the switch via an Ethernet connection, the PC must have an IP

address in the same subnet as the switch. For example, if the switch has an IP address of

192.168.0.1, the PC should have an IP address of 192.168.0.x (where x is a number between 2 ~

254), and a subnet mask of 255.255.255.0

Open the web browser and enter 192.168.0.1 (the factory-default IP address) in the address bar.

Then press <Enter>.

Enter the IP address in the web browser

NOTE: The switch's factory default IP address is 192.168.0.1 with a subnet mask of

To log in to the switch, the IP address of your PC should be set in the same subnet as that of the

switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254). Subnet Mask is

255.255.255.0. 255.255.255.0

When the following logon dialog box appears, enter the password then click OK.

By default, the username is admin and the password is admin.