Siemens SIMATIC NET Manual de instalación - Página 19

Navegue en línea o descargue pdf Manual de instalación para Equipamiento industrial Siemens SIMATIC NET. Siemens SIMATIC NET 50 páginas. Network components bus terminal
También para Siemens SIMATIC NET: Manual de instrucciones (29 páginas), Manual de instrucciones (50 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones de montaje (6 páginas), Información sobre el producto (6 páginas), Manual de instalación (40 páginas), Manual de instalación (40 páginas), Manual de referencia (14 páginas), Manual de instalación (34 páginas), Manual de instalación (48 páginas), Manual de instrucciones (32 páginas)

Installing the Device

2.4.1 Mounting the Device on a DIN Rail

Note

Heat generated by the device is channeled outwards from the enclosure. As such, it

is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the

device to allow for some convectional airflow.

Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Note

For detailed dimensions of the device with either DIN rail or panel hardware installed,

refer to

2.4.1

Mounting the Device on a DIN Rail

The RUGGEDCOM RS900F can be ordered with a DIN rail adapter preinstalled on the

back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4

in) IEC/EN 60715 or TS35 DIN rail.

"Dimension Drawings (Page

30)".

Installation Manual, 04/2021, C79000-G8976-1350-07

RUGGEDCOM RS900F