Siemens SIMATIC NET Panduan Instalasi - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Industri Siemens SIMATIC NET. Siemens SIMATIC NET 50 halaman. Network components bus terminal
Juga untuk Siemens SIMATIC NET: Panduan Petunjuk Pengoperasian (29 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Manual Petunjuk Perakitan (6 halaman), Informasi Produk (6 halaman), Panduan Instalasi (40 halaman), Panduan Instalasi (40 halaman), Panduan Referensi (14 halaman), Panduan Instalasi (34 halaman), Panduan Instalasi (48 halaman), Panduan Petunjuk Pengoperasian (32 halaman)

Installing the Device

2.4.1 Mounting the Device on a DIN Rail

Note

Heat generated by the device is channeled outwards from the enclosure. As such, it

is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the

device to allow for some convectional airflow.

Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Note

For detailed dimensions of the device with either DIN rail or panel hardware installed,

refer to

2.4.1

Mounting the Device on a DIN Rail

The RUGGEDCOM RS900F can be ordered with a DIN rail adapter preinstalled on the

back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4

in) IEC/EN 60715 or TS35 DIN rail.

"Dimension Drawings (Page

30)".

Installation Manual, 04/2021, C79000-G8976-1350-07

RUGGEDCOM RS900F