Siemens SIMATIC NET Installation Manual - Page 19

Browse online or download pdf Installation Manual for Industrial Equipment Siemens SIMATIC NET. Siemens SIMATIC NET 50 pages. Network components bus terminal
Also for Siemens SIMATIC NET: Operating Instructions Manual (29 pages), Operating Instructions Manual (50 pages), Operating Instructions Manual (28 pages), Assembly Instructions Manual (6 pages), Product Information (6 pages), Installation Manual (40 pages), Installation Manual (40 pages), Reference Manual (14 pages), Installation Manual (34 pages), Installation Manual (48 pages), Operating Instructions Manual (32 pages)

Print Page

Installing the Device

2.4.1 Mounting the Device on a DIN Rail

Note

Heat generated by the device is channeled outwards from the enclosure. As such, it

is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the

device to allow for some convectional airflow.

Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Note

For detailed dimensions of the device with either DIN rail or panel hardware installed,

refer to

2.4.1

Mounting the Device on a DIN Rail

The RUGGEDCOM RS900F can be ordered with a DIN rail adapter preinstalled on the

back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4

in) IEC/EN 60715 or TS35 DIN rail.

"Dimension Drawings (Page

30)".

Installation Manual, 04/2021, C79000-G8976-1350-07

RUGGEDCOM RS900F