Siemens SINAMICS S120 Manual de aplicaciones - Página 36

Navegue en línea o descargue pdf Manual de aplicaciones para Equipamiento industrial Siemens SINAMICS S120. Siemens SINAMICS S120 46 páginas. Applications for cabinet modules, liquid-cooled
También para Siemens SINAMICS S120: Manual de instrucciones (20 páginas), Primeros pasos (32 páginas), Manual (41 páginas), Descripción breve (22 páginas), Manual (43 páginas), Instrucciones de instalación en armarios para aplicaciones de propulsión marina (28 páginas), Manual de aplicaciones (34 páginas), Manual de instrucciones (22 páginas), Primeros pasos (32 páginas), Manual de instrucciones (21 páginas), Manual de ingeniería (30 páginas), Manual de puesta en servicio (20 páginas)

Commissioning

5.2 Preconditions

5.2

Preconditions

Only carry out the commissioning if the following requirements have been fulfilled:

● The technical specifications for the hardware layout have been adhered to, see

Chapter: Technical requirements (Page 23).

● The DRIVE-CLiQ connections are implemented in accordance with the system requirement

between the Motor Modules Booksize connected in parallel and the following components:

– Encoder modules, any existing DRIVE-CLiQ encoders

– Control Unit CU320-2 with CF card, Firmware V5.2

Note

Commissioning of the parallel connection

● Remove other Motor Modules from the DRIVE-CLiQ group before commissioning the

● Always create the project for the Motor Modules Booksize connected in parallel first.

● The supply voltage is connected.

● The STARTER commissioning tool is started on the commissioning PC/PG.

● The connection between the Control Unit and the commissioning PC/PG is established.

parallel connection.

Motor Modules Booksize parallel connection

Application Manual, 01/2020, 6SL3097-5BF00-0BP0