Siemens SINAMICS S120 Applications Manual - Page 36

Browse online or download pdf Applications Manual for Industrial Equipment Siemens SINAMICS S120. Siemens SINAMICS S120 46 pages. Applications for cabinet modules, liquid-cooled
Also for Siemens SINAMICS S120: Operating Manual (20 pages), Getting Started (32 pages), Manual (41 pages), Short Description (22 pages), Manual (43 pages), Instruction For Installation In Cabinets For Marine Drive Applications (28 pages), Applications Manual (34 pages), Operating Instructions Manual (22 pages), Getting Started (32 pages), Operating Instructions Manual (21 pages), Engineering Manual (30 pages), Commissioning Manual (20 pages)

Print Page
Siemens SINAMICS S120 Applications Manual
Commissioning

5.2 Preconditions

5.2
Preconditions
Only carry out the commissioning if the following requirements have been fulfilled:
● The technical specifications for the hardware layout have been adhered to, see
Chapter: Technical requirements (Page 23).
● The DRIVE-CLiQ connections are implemented in accordance with the system requirement
between the Motor Modules Booksize connected in parallel and the following components:
– Encoder modules, any existing DRIVE-CLiQ encoders
– Control Unit CU320-2 with CF card, Firmware V5.2
Note
Commissioning of the parallel connection
● Remove other Motor Modules from the DRIVE-CLiQ group before commissioning the
● Always create the project for the Motor Modules Booksize connected in parallel first.
● The supply voltage is connected.
● The STARTER commissioning tool is started on the commissioning PC/PG.
● The connection between the Control Unit and the commissioning PC/PG is established.
34
parallel connection.
Motor Modules Booksize parallel connection
Application Manual, 01/2020, 6SL3097-5BF00-0BP0