Siemens SIWAREX WL230 BB-S SA Manual de instrucciones - Página 28
Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento industrial Siemens SIWAREX WL230 BB-S SA. Siemens SIWAREX WL230 BB-S SA 48 páginas. Base plate and elastomer bearing bb-s sa
También para Siemens SIWAREX WL230 BB-S SA: Manual (36 páginas), Manual de equipamiento (50 páginas), Manual de instrucciones (44 páginas)
Imprimir página
Installation
5.2 Installing the base plate and elastomeric bearing
5.2.6
Bolt the load cell to the base plate
Procedure
Figure 5-4
1. Place the load cell on the base plate in alignment with the drill holes.
2. Position the washers.
3. Screw in and tighten the hexagon bolts.
28
Bolt the load cell to the base plate
NOTICE
Damage to the load cell
When tightening the bolts, do not hold the load cell to counter the force. This will prevent
damage to the load cell.
Adhere to the tightening torques:
• SIWAREX WL230 SB-S SA load cell with a rated load of 0.5 t, 1 t, 2 t: 80 Nm
• SIWAREX WL230 SB-S SA load cell with a rated load of 5 t: 391 Nm
Operating Instructions, 03/2013, A5E31529044A-01
SB-S SA