- ページ 28

産業機器 Siemens SIWAREX WL230 BB-S SAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIWAREX WL230 BB-S SA 48 ページ。 Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA にも： マニュアル (36 ページ), 設備マニュアル (50 ページ), 取扱説明書 (44 ページ)

ページを印刷する
Siemens SIWAREX WL230 BB-S SA 取扱説明書
Installation
5.2 Installing the base plate and elastomeric bearing
5.2.6

Bolt the load cell to the base plate

Procedure
Figure 5-4
1. Place the load cell on the base plate in alignment with the drill holes.
2. Position the washers.
3. Screw in and tighten the hexagon bolts.
28
Bolt the load cell to the base plate
NOTICE
Damage to the load cell
When tightening the bolts, do not hold the load cell to counter the force. This will prevent
damage to the load cell.
Adhere to the tightening torques:
• SIWAREX WL230 SB-S SA load cell with a rated load of 0.5 t, 1 t, 2 t: 80 Nm
• SIWAREX WL230 SB-S SA load cell with a rated load of 5 t: 391 Nm
Operating Instructions, 03/2013, A5E31529044A-01
SB-S SA