Cisco 7940G Manual de administración - Página 18

Navegue en línea o descargue pdf Manual de administración para Teléfono IP Cisco 7940G. Cisco 7940G 29 páginas. Ios telephony services ip phone
También para Cisco 7940G: Manual del usuario (21 páginas), Manual del usuario (25 páginas), Ficha de datos (7 páginas), Manual (35 páginas), Referencia rápida (2 páginas), Manual del usuario (15 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (20 páginas), Manual del teléfono (17 páginas), Manual del administrador (15 páginas), Manual del usuario (16 páginas), Manual de referencia (24 páginas), Manual (21 páginas), Manual de instalación (12 páginas), Manual del usuario (10 páginas)

Imprimir página
Cisco 7940G Manual de administración

How to Set the Date and Time

•
•
•
•
•
•
•
•
For more information on the values each of these parameters can take, see
Parameters."
Configuration File" section on page
Step 3
Press the Save softkey.
The phone programs the new information into flash memory and resets.
How to Set the Date and Time
You can set date, time, and daylight savings time (DST) parameters. The current date and time is
supported on the Cisco Unified IP Phone 7960G and 7940G using Simple Network Time Protocol
(SNTP) and is displayed on the LCD. DST and time-zone settings are also supported.
International time-zone abbreviations are supported and must be in all capital letters.
We recommend that you set date- and time-related parameters in the default file for all phones.
Note
Alternatively, you can set the time-zone parameter manually on the phone or in the phone-specific
configuration files.
Prerequisites
•
•
•
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
3-18
anonymous_call_block—Allow (default) or block incoming anonymous calls.
auto_answer—Define the intercom line number (cannot be set in configuration file).
autocomplete—Enable or disable (default) automatic completion of stored numbers. Specific to
phone.
callerid_blocking—Enable or disable (default) caller ID blocking. Specific to phone.
call_hold_ringback—Enable or disable (default) a ringback from calls on hold after you hang up
another call. Specific to phone.
call_waiting—Enable (default) or disable acceptance of call waiting calls. Specific to phone.
dnd_control—Enable or disable (default) the Do Not Disturb feature. Specific to phone.
stutter_msg_waiting—Enable or disable (default) a stutter tone when a message is waiting.
For more information on setting parameters, see the
Determine the type of DST that you want to configure:
–
Absolute DST (for example, starts on April 1 and ends on October 1)
–
Relative DST (for example, starts on the first Sunday in April and ends on the last Sunday of
October)
Review the list of common and absolute DST parameters from
Parameters."
Review the information on SNTP in
phone obtains the current time from an SNTP server.
Determine your time zone from
3-8.
Table 3-4 on page
3-20. SNTP parameters specify how the
Table 3-5 on page
3-21.
Chapter 3
Initializing Cisco Unified IP Phones
Appendix D, "SIP IP Phone
"How to Customize a Phone-Specific
Appendix D, "SIP IP Phone
OL-7890-01