Cisco 7940G Administration Manual - Page 18

Browse online or download pdf Administration Manual for IP Phone Cisco 7940G. Cisco 7940G 29 pages. Ios telephony services ip phone
Also for Cisco 7940G: User Manual (21 pages), User Manual (25 pages), Datasheet (7 pages), Manual (35 pages), Quick Reference (2 pages), User Manual (15 pages), Quick Reference Manual (2 pages), User Manual (20 pages), Phone Manual (17 pages), Administrator's Manual (15 pages), User Manual (16 pages), Reference Manual (24 pages), Manual (21 pages), Installation Manual (12 pages), User Manual (10 pages)

Print Page

How to Set the Date and Time

•

For more information on the values each of these parameters can take, see

Parameters."

Configuration File" section on page

Step 3

Press the Save softkey.

The phone programs the new information into flash memory and resets.

How to Set the Date and Time

You can set date, time, and daylight savings time (DST) parameters. The current date and time is

supported on the Cisco Unified IP Phone 7960G and 7940G using Simple Network Time Protocol

(SNTP) and is displayed on the LCD. DST and time-zone settings are also supported.

International time-zone abbreviations are supported and must be in all capital letters.

We recommend that you set date- and time-related parameters in the default file for all phones.

Note

Alternatively, you can set the time-zone parameter manually on the phone or in the phone-specific

configuration files.

Prerequisites

•

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-18

anonymous_call_block—Allow (default) or block incoming anonymous calls.

auto_answer—Define the intercom line number (cannot be set in configuration file).

autocomplete—Enable or disable (default) automatic completion of stored numbers. Specific to

phone.

callerid_blocking—Enable or disable (default) caller ID blocking. Specific to phone.

call_hold_ringback—Enable or disable (default) a ringback from calls on hold after you hang up

another call. Specific to phone.

call_waiting—Enable (default) or disable acceptance of call waiting calls. Specific to phone.

dnd_control—Enable or disable (default) the Do Not Disturb feature. Specific to phone.

stutter_msg_waiting—Enable or disable (default) a stutter tone when a message is waiting.

For more information on setting parameters, see the

Determine the type of DST that you want to configure:

–

Absolute DST (for example, starts on April 1 and ends on October 1)

–

Relative DST (for example, starts on the first Sunday in April and ends on the last Sunday of

October)

Review the list of common and absolute DST parameters from

Parameters."

Review the information on SNTP in

phone obtains the current time from an SNTP server.

Determine your time zone from

3-8.

Table 3-4 on page

3-20. SNTP parameters specify how the

Table 3-5 on page

3-21.

Chapter 3

Initializing Cisco Unified IP Phones

Appendix D, "SIP IP Phone

"How to Customize a Phone-Specific

Appendix D, "SIP IP Phone

OL-7890-01