Cisco 7940G Manuale di amministrazione - Pagina 18

Sfoglia online o scarica il pdf Manuale di amministrazione per Telefono IP Cisco 7940G. Cisco 7940G 29. Ios telephony services ip phone
Anche per Cisco 7940G: Manuale d'uso (21 pagine), Manuale d'uso (25 pagine), Scheda tecnica (7 pagine), Manuale (35 pagine), Riferimento rapido (2 pagine), Manuale d'uso (15 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (20 pagine), Manuale del telefono (17 pagine), Manuale dell'amministratore (15 pagine), Manuale d'uso (16 pagine), Manuale di riferimento (24 pagine), Manuale (21 pagine), Manuale di installazione (12 pagine), Manuale d'uso (10 pagine)

Stampa la pagina
Cisco 7940G Manuale di amministrazione

How to Set the Date and Time

•
•
•
•
•
•
•
•
For more information on the values each of these parameters can take, see
Parameters."
Configuration File" section on page
Step 3
Press the Save softkey.
The phone programs the new information into flash memory and resets.
How to Set the Date and Time
You can set date, time, and daylight savings time (DST) parameters. The current date and time is
supported on the Cisco Unified IP Phone 7960G and 7940G using Simple Network Time Protocol
(SNTP) and is displayed on the LCD. DST and time-zone settings are also supported.
International time-zone abbreviations are supported and must be in all capital letters.
We recommend that you set date- and time-related parameters in the default file for all phones.
Note
Alternatively, you can set the time-zone parameter manually on the phone or in the phone-specific
configuration files.
Prerequisites
•
•
•
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
3-18
anonymous_call_block—Allow (default) or block incoming anonymous calls.
auto_answer—Define the intercom line number (cannot be set in configuration file).
autocomplete—Enable or disable (default) automatic completion of stored numbers. Specific to
phone.
callerid_blocking—Enable or disable (default) caller ID blocking. Specific to phone.
call_hold_ringback—Enable or disable (default) a ringback from calls on hold after you hang up
another call. Specific to phone.
call_waiting—Enable (default) or disable acceptance of call waiting calls. Specific to phone.
dnd_control—Enable or disable (default) the Do Not Disturb feature. Specific to phone.
stutter_msg_waiting—Enable or disable (default) a stutter tone when a message is waiting.
For more information on setting parameters, see the
Determine the type of DST that you want to configure:
–
Absolute DST (for example, starts on April 1 and ends on October 1)
–
Relative DST (for example, starts on the first Sunday in April and ends on the last Sunday of
October)
Review the list of common and absolute DST parameters from
Parameters."
Review the information on SNTP in
phone obtains the current time from an SNTP server.
Determine your time zone from
3-8.
Table 3-4 on page
3-20. SNTP parameters specify how the
Table 3-5 on page
3-21.
Chapter 3
Initializing Cisco Unified IP Phones
Appendix D, "SIP IP Phone
"How to Customize a Phone-Specific
Appendix D, "SIP IP Phone
OL-7890-01