Siemens Sitrans WM100 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Interruptor Siemens Sitrans WM100. Siemens Sitrans WM100 22 páginas. Motion sensing switch
También para Siemens Sitrans WM100: Manual de instrucciones (16 páginas)
Imprimir página
Connecting
5.1 WM100 Circuit Card
WM100 Connection
Note
1. Dry contacts shown in de-energized (alarm or shelf) state.
2. WM100 is manufactured for either 115 or 230 V AC operation. Check WM100 nameplate
for applicable voltage. Correct voltage must be supplied. Voltages lower than specified
will result in an inoperative condition. Voltages higher than specified will severely damage
unit.
3. For 5 second time delay and minimum 12 ppm range, connect jumper across terminals 7
and 8. Without a jumper, the default is 10 second time delay and minimum 6 ppm range.
10
Operating Instructions, 07/2017, A5E45103494-AA
SITRANS WM100