Siemens Sitrans WM100 Operating Instructions Manual - Page 10

Browse online or download pdf Operating Instructions Manual for Switch Siemens Sitrans WM100. Siemens Sitrans WM100 22 pages. Motion sensing switch
Also for Siemens Sitrans WM100: Operating Instructions Manual (16 pages)

Siemens Sitrans WM100 Operating Instructions Manual
Connecting
5.1 WM100 Circuit Card
WM100 Connection
Note
1. Dry contacts shown in de-energized (alarm or shelf) state.
2. WM100 is manufactured for either 115 or 230 V AC operation. Check WM100 nameplate
for applicable voltage. Correct voltage must be supplied. Voltages lower than specified
will result in an inoperative condition. Voltages higher than specified will severely damage
unit.
3. For 5 second time delay and minimum 12 ppm range, connect jumper across terminals 7
and 8. Without a jumper, the default is 10 second time delay and minimum 6 ppm range.
10
Operating Instructions, 07/2017, A5E45103494-AA
SITRANS WM100